Codes and combinations are encrypted and stay hidden until someone chooses to reveal them, and every reveal is logged so you know who looked and when. Key, fob and remote tags are shown in plain text, since that information is already printed on the physical tag.
How Keys & Access is structured
Everything in Keys & Access is organized into access points and the keys or codes that unlock them.
Access point: the physical spot you need to get into, such as the front door, community gate or garage.
Key or code: a way to unlock that access point. Each access point can hold as many as you need. For example, a front door might have a physical key for the office, one keypad code for maintenance and a different keypad code for the resident.
Every key or code includes an Issued to setting, so it's easy to see who it's meant for.
Before you begin
Adding, editing or removing access points, keys and codes requires the Update Property permission under Properties. Users without it can still open the tab and view codes.
No special permission is needed to view a code, but each view is captured in the audit log.
Keys & Access is internal to your team. It never appears in the owner, resident, applicant or vendor portals.
Finding the Keys & Access tab
Go to any property or unit and select the Keys & Access tab. The layout depends on the type of property:
Single-family property: You'll see one Property Access card that holds everything for the home.
Multi-unit property: The Property Access card carries an Accessible by all units badge. Use it for anything every unit shares, such as a community gate, lobby door or master key. Keys and codes that belong to just one unit go on that unit instead.
Unit on a multi-unit property: You'll see a Unit Access card for that specific unit. Below it, the property's shared access points appear in a read-only Property Access card, with a Manage Property Access link that takes you back to the property.
Adding an access point
Go to the property or unit and select the Keys & Access tab.
Click the + at the top of the card. If the card is empty, click Add Access Item.
Under What is it, pick the type of entry, such as Door, Gate or Garage. You can start typing to search.
Under Location, describe which one it is, such as Front or Back. This is how you tell a Front Door from a Back Door.
Under Brand, add the hardware manufacturer if you know it, such as Kwikset or Schlage. This comes in handy when it's time to rekey.
Enter any Notes.
Click Save.
Your new access point now appears on the card, ready for you to add the keys and codes that open it.
Adding a key or code
Below the access point, click Add key or code.
Under Type, select Key, Code, Fob / Card, Remote, Lockbox, Smart Lock or Other.
Under Issued to, select who it's for. This defaults to Shared.
Enter the tag, code or combination. The label on this field updates based on the type you selected (see the table below).
For keys, fobs, remotes and other items, fill in the number of Copies if you have it.
Enter any Notes.
Click Save.
Repeat for every key or code that opens the same access point.
Fields by type
Type | Field label | Storage | Tracks copies |
Key | Key tag | Plain text, searchable | Yes |
Fob / Card | Fob tag | Plain text, searchable | Yes |
Remote | Remote tag | Plain text, searchable | Yes |
Code | Code | Encrypted and hidden | No |
Lockbox | Combination | Encrypted and hidden | No |
Smart Lock | Code | Encrypted and hidden | No |
Other | Value | Plain text, searchable | Yes |
Copies accepts a whole number between 1 and 999, or it can be left empty.
Issued to options
Issued to | Best for |
Shared | Anyone who needs to get in |
Property Manager | Your office team |
Maintenance | Your in-house maintenance staff |
Vendor | An outside contractor or company |
Resident | The current tenant; update it at turnover |
Showing | A temporary code for one showing |
Owner | The property owner |
A badge on each key or code shows who it's issued to. Items set to Shared have no badge.
Viewing a code
Codes, combinations and smart lock codes are masked with dots until you reveal them.
Click the eye icon beside the code.
The code is displayed. Click the icon again to mask it.
Each reveal adds a Credential Value Viewed entry to that code's audit log, including your name and the time.
Editing or removing a key or code
Click the three dots beside a key or code to find Edit, Remove and Audit Log.
Edit brings up the same form used to create it. Opening the edit form on a code fills in the current value, and that counts as a view in the audit log.
Remove deletes only that key or code. Everything else on the access point stays in place.
Updating just the notes or the Issued to setting leaves the code itself unchanged.
Editing or deleting an access point
Click the three dots beside the access point to find Edit, Delete and Audit Log.
Deleting an access point also removes every key and code attached to it. You'll be prompted to confirm before anything is deleted.
Checking who viewed or changed a code
Each access point and each key or code keeps its own audit log.
Click the three dots beside the key or code.
Select Audit Log.
Use the filter at the top to show All activity, Views only or Changes only.
A code's audit log records when it was created, updated and viewed, along with who did it. The code itself never appears in the log. When a code changes, the log notes the change but not the previous or new value. Key tag changes, on the other hand, show both the old and new tag, giving you a history of every rekey.
Reviewing access changes on the Activity tab
Both properties and units have an Activity tab. It lists every time an access point, key or code is added, removed or reassigned, along with who made the change and when. Deleted items remain visible on the Activity tab.
Building-level access points appear on the property's Activity tab, and unit access points appear on the unit's Activity tab.
Code views and code value changes are not shown on the Activity tab. Check the item's audit log for those.
Converting your custom fields to Keys & Access
If your team has been storing keys and codes in custom fields, Rentvine can move them over for you.
Open Settings.
Under Other, select Convert Keys & Access.
If your custom field names aren't obvious, use Optional: tell us how your fields map to give a hint. For example: "'KW #' is the front door key tag; 'Community Code' is the gate code." This step is optional.
Click Preview Conversion. The preview processes in the background, so feel free to navigate away and return later.
Look over the preview. It lists how many items will be created, how many need your review and how many already exist. Each custom field shows how it was interpreted, such as "Gate Code: Code opening a Gate."
Apply the conversion.
Every custom field is turned into one access point containing one key or code, issued to Shared. The access point's notes list the name of the original custom field.
Your custom fields are left exactly as they are and are never edited or deleted. You can run the conversion as often as you want, and anything already converted will be skipped.
Note: When a single custom field contains multiple items, such as "Master Key / Kwikset # / Other keys," it's flagged for review rather than split apart. Add those items manually.
Best practices
Create one access point for each physical entry, then add every key and code that opens it beneath it. A front door with both a deadbolt and a keypad is a single access point with two items.
Add shared access, like a gate or lobby, at the property level. Add unit doors on the unit.
Set tenant codes to Resident so you know exactly which ones to change at turnover.
Don't store codes in Notes. Only the code field is encrypted.
The Other type is saved in plain text. For anything sensitive, use Code instead.
Frequently asked questions
Who has access to view codes? Any team member who can open the property can view its codes. Each view is logged in that code's audit log.
Why are key tags visible while codes are hidden? A key tag is printed on the tag and only tells you which key or hook to grab. A code actually lets someone inside, so it's encrypted and stays hidden until you choose to view it.
Can a single key be linked to multiple doors? Not at this time. Add the key to each access point it opens.
Can I add a building master key once for all units? Yes. On a multi-unit property, add it at the property level and it will appear on every unit in the read-only Property Access card.
Can residents, owners or vendors see Keys & Access? No. Keys & Access is only visible to your team inside Rentvine.
Can I track who has a copy of a key? Not at this time. The Copies field shows how many copies exist, not who holds them.
Troubleshooting
The + button or Add key or code option is missing You need the Update Property permission under Properties. Ask an admin on your account to grant it.
I can't add a unit's key from the property page On multi-unit properties, the property page is reserved for access shared by all units. Open the unit and add the key on its Keys & Access tab.
The Copies field won't save Copies must be a whole number between 1 and 999, or left empty.
A code displays -- instead of dots The code was saved with no value. Click the three dots, select Edit and enter the code.
The conversion skipped one of my custom fields A field is skipped as already on file when a matching key or code already exists for that unit. A field holding more than one item is flagged instead. Add those manually.










